Product introduce

The controller for Totalizing Hopper Scale or Batching Scale is of two types.
One is the specially designed controller for Totalizing Hopper Scale or Batching Scale .
 This type of meter has fixed functions with a few parameters for customers to choose,
  but not many. Due to the complicacy of the different work flows, this type of controller
   cannot meet the needs of the customers. Thus, the customers have to ask the manufacturer
    to make special controller for them. This costs a lot of money and time and also causes
    trouble for maintenance. The other one is normal scale added with PLC ( Programmable
     Logic Controller ) which gets weight data from normal scale and completes the flow
      processing using PLC. While this kind of structure is flexible, it is too complicated,
      too expensive. Moreover, the PLC programming is too difficult for personnel
       in scale industry to master.

XK3196C2 programmable weighing indicator controller developed by Hangzhou Sifang Scale
Factory adopts special chip which combines the advantages of the above mentioned two types.
XK3196C2 is a single weighing indicator, the installing hole is only 151mm (width) * 76mm
(height) * 170mm (depth). Customers can program to config its function and work flow.
 What’s more, the programming is very simple; one command is in accordance with a step
 in a procedure. For example: “WAIT W 2” stands for “feed to the set ‘high-speed feeding
 quantity’”. Normally, the programming is completed after the whole procedure is written
  down step by step. Generally, a customer program consists of about ten commands.
  Even if the customers don’t have any programming background, they can master this
  after a short training (2 or 3 days), and if the customers have some programming
  experience, they can use it after reading the manual. To facilitate our customers,
   we developed programming software package to give away with our machine.
   The programming is through its COM, so our customers can program online and thus
   change the work flow conveniently. We can program for our customer according to
    the work flow.

1. Input: 8, photoelectric isolation

2. Output: 8, optional solid-state relay output and mechanical relay output

3. Sampling rate: 50Hz

4. Sampling size: 24 bit A/D

The functions of this controller are only limited by the total number of input and output, so we can config it as following:
1. One material, four speed batching packing control

2. Two materials, three speed feeding system

3. Two materials, two speed feeding plus one material single speed feeing

4. Totalizing hopping scale controller

5. Batching weighing system using weigh-out method